Setting The Volume; Muting The Audio Playback; Selecting A Playback Mode; Radio Playback - Sonoro SO-210 Mode D'emploi

10.1

Setting the volume

Fig. 28: Setting the volume
1. Turn the click wheel (Fig. 28) to increase or
decrease the volume.
ð A volume control is shown on the display.
10.2

Muting the audio playback

Mute
Fig. 29: Mute
1. In playback mode, briefly press the [MUTE]
button on the top of the device to turn off the
sound during playback. Alternatively, you can
also press the [MUTE] button on the remote
control.
ð The [Volume Mute] Fig. 29 text appears on
the display
Switching on the sound
2. To turn the sound back on, press the [MUTE]
button on the device or the remote control
again.
ð The initial screen is displayed.
10.3

Selecting a playback mode

Select the desired mode to playback audio from dif-
ferent media or external devices.
Fig. 30: Selecting a playback mode
© 2013
1. Switch on the device.
2. Press the [MODE] button on the front of the
device or the desired mode on the remote con-
trol.
ð The selected mode is displayed (Fig. 30).
i
Alternatively, you can also rotate the click wheel
after pressing the [MODE] button to toggle
through the different modes. Confirm the mode by
pressing the click wheel.
11

Radio playback

After you have selected radio playback from FM-DAB,
the FM or DAB symbol appears on the display. In
radio mode, the display shows the following informa-
tion:
n Mode: FM or DAB.
n Stored programme channel, if the radio station is
stored in the programme memory.
n Station name, if the station transmits RDS text.
n RDS text transmitted by the station, if the station
transmits RDS text.
i
RDS is only available for stations in the FM fre‐
quency range and only if the corresponding sta‐
tion transmits RDS data.
If the station does not broadcast RDS text, then the
frequency is displayed instead of the station name.
11.1

FM Radio

11.1.1

Searching an FM station

Automatic tuning
Prerequisite:
The DAM/FM antenna is connected.
Fig. 31: Automatic tuning
1. Press and hold the [Next] or [Previous] button in
FM playback mode to activate the automatic
station search function.
ð The display shows the [Auto Tuning] (Fig. 31)
text.
57