Berbel ConInterface Manuel De Montage page 38

Installation
3.3 Installing the device
 When working on the extractor
fan refer to the corresponding
instructions.
Headroom hoods EG-2, Headroom
hoods GL-2, Headroom hoods FO and
Wall hoods – attachment to the chimney
fastening
Headroom hoods ST – internal attachment
to the hood body
38
Island hoods – attachment to the fan box
☞ Clean the area in which the device is
to be fitted.
☞ Remove the adhesive film from the
device.
☞ Secure the device.
☞ Connect the device with the extractor
hood.
☞ Reconnect the extractor hood to the
power supply.
6005005_0 – 13.08.2020