Wolfcraft MASTER 750 ERGO Notice D'utilisation Originale page 29

MOUNTING A MITRE SAW
Place the mitre saw in the centre of the table with the mounting bores aligned with
the slots of the two table tops. The front table top can be extended or retracted un-
til the slots are positioned beneath the front mounting bores. Now fasten the mitre
saw by inserting the four screws and the four small washers through the mounting
bores and table tops from above. With the large washers and nuts, firmly tighten
the screws from below (Fig. 8.1). Subsequently check that the mitre saw is moun-
ted in the centre of the table, so that the centre of gravity of the saw is in the
middle and the table cannot tip over.
Alternative mounting method
When the slotted holes above the spindles are used, the screws have
to be inserted from below (Fig. 8.2).
MOUNTING THE WOLFCRAFT 3406
Place the drill stand in the centre of the table with the mounting bores aligned with
the slots of the two table tops. The front table top can be extended or retracted un-
til the slots match the front mounting bores. Insert the four screws and four large
washers through the mounting bores from above and tighten them with the small
washers and nuts underneath the tabletop (Fig. 8.3).
MAINTENANCE AND CLEANING
– After any work, always clean the clamping and working table using a dry
cloth.
– Do not use aggressive and/or abrasive cleaning agents or solvents.
DISASSEMBLY AND DISPOSAL
Dispose of the packaging materials in an environmentally friendly manner. In the
event of disposing of the MASTER 750
WARRANTY CONDITIONS
Dear DIY enthusiast, you have purchased a high-quality wolfcraft® product which
we know you will enjoy using. wolfcraft® products are built to high technical
standards and undergo intensive development and testing before leaving the fact-
ory. Constant checks and regular tests during their production ensure a high stand-
ard of quality. Sound technical developments and reliable quality assurance give
you the certainty that you have made the right purchase decision. For this wolfcraft
product, we grant you a 10 year warranty from the date of purchase, provided it is
used exclusively for DIY purposes. This warranty only covers damage to the object
of purchase itself and only such damage that is attributable to material or manu-
facturing defects. This warranty does not cover defects or damage attributable to
improper operation or inadequate maintenance of the appliance. Moreover, the
warranty does not include the effects of normal wear, or defects or damage known
to the customer upon conclusion of the purchase contract. Warranty claims can
only be asserted upon submission of the invoice/proof of purchase. The warranty
granted by wolfcraft does not restrict your legal rights as a consumer (supplement-
ary performance, rescission or reduction, compensation for damages or expenses).
Address warranty claims to:
wolfcraft GmbH
Wolffstraße 1
56746 Kempenich
Germany
000 000
OR 5027 DRILL STAND
ERGO
, observe local disposal regulations.
29