Coolant Level - Nanni Diesel T4.165 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
Inspection and adjustment of the levels

Coolant level

Warning !: When fi lling the cooling system, the
I
coolant level must be checked after 10 minutes of
use since the system purges itself automatically. Top
A
up if necessary.
A. Coolant plug
Turn the fi ller plug up to its fi rst stop to allow the pressure
in the system to escape before removing the plug. Inspect
the fl uid level.
The level should be between the lower edge of the
fi ller neck and the level pin (if equipped), respectively
representing the minimum and maximum level.
Top up if necessary using a fl uid comprising 50% water
and 50% antifreeze.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T4.180T4.200

Table des Matières