Soehnle Style Sense Connect 100 Mode D'emploi page 10

EN
A. Operating elements
1. Minus ( )
2. Confirm ( )
3. Plus ( )
B. Preparation
1. Insert batteries (3 x 1.5 V AAA).
Note:
Immediately (as long as „0.0" is still being dis­
played) place the personal scale on a level sur­
face and wait until the scale powers down au­
tomatically.
Otherwise, it might be possible that the weight
of the scale would erroneously be added to
the initial weighting process.
The same might occur during regular opera­
tion if the scale is held in the hand prior to the
weighting process.
2. For all measurements, place scale level on a
hard surface (not on carpet).
3. Cleaning and care: Clean only using a slightly
damp cloth. Do not use solvents or abrasives.
Never submerge scale in water.
4. A country­specific option to switch from kg/cm
to st/in or lb/in is possible by pushing the key
on the bottom of the scale to switch units
C. Data input for recognition of persons
1. Press button.
2. Use / buttons to select memory slot and
confirm with
3. Now immediately place the scale on the floor,
wait until the screen displays „0.0" and then
step on the scale.
The initial measurement is indispensable and
serves to store the data for later automatic
recognition of persons. If no person steps on
the scale, the process must be repeated. The
first measurement is performed after a person
steps on the scale.
The scale is equipped with a time­out mode. It
will automatically switch off after approx. 40
seconds if no keys are pressed.
8
.
Alternative:
You can also perform this step conveniently via
the Soehnle Connect app, in which case the data
is transferred to the scale. The first measurement
is necessary, however. Once you have entered the
data on the scale for the recognition of persons as
described under C, the Soehnle Connect app will
automatically adopt this.
D. Notifications
1. Replace battery (Lo = low battery)
2. Overloading of scale (max. 180 kg)
E. Other add-on functions via the
Soehnle Connect app
You can connect this body analysis scale with your
smartphone (iOS or Android
®
the Soehnle Connect app for this to make use of
more functions among other things:
1. Displays the body mass index (BMI)
2. Difference to standard BMI
3. Difference to last weighing
4. Difference to the desired weight
F. IInstallation of the Soehnle
Connect app
Install the Soehnle Connect app on your smart­
phone or tablet as follows:
Android smartphones / tablets
™
If you use an Android device, download and install
the Soehnle Connect app from the Google Play
Store. To do so, scan the QR code or open the
app with the name "Play Store" and look for
"Soehnle Connect app". Then load and install the
free app.
) via Bluetooth . Use
™ ®