Medela Vario18 AC Mode D'emploi page 32

Cleaning jars and lids
Clean components in hot water (60 – 70 °C) containing a
detergent with a pH range between 6.0 and 8.0 only.
1. Soak all parts thoroughly with warm, soapy water
(60 – 70 °C) or in enzymatic detergent for 1–5 minutes.
2. Remove visible dirt with a cleaning tool – general
purpose cleaning brushes, such as pipe cleaners or
non-abrasive lint cloths. Rinse thoroughly in clear
water. Allow to dry.
3. Check the parts for visible dirt and repeat these steps
if necessary.
Alternatively the jars / lids can be placed in a dishwasher
for cleaning.
Cleaning pump housing, mains cable and plastic
accessories
Wipe with detergent recommended by your healthcare
provider. Use clean cloth to dry.
32