Publicité
1
2
3
4
5
6
1. Gimbal Connector
2. Pan Motor
3. microSD Slots
4. Tilt Motor
Installation
1. Remove the gimbal cap.
2. The following installation display takes the Matrice 200 aircraft as
an example. Rotate the gimbal connector to the unlocked position
and insert the gimbal, and then rotate the gimbal connector to the
locked position.
1 1
1 2
Hold the gimbal connector firmly and apply a steady, firm rotating force when
attaching or detaching the gimbal.
Ensure the microSD card slot cover is firmly in place to prevent dust or moisture
entering during usage or transportation.
5. Visual Camera
6. Infrared Thermal Camera
7. Roll Motor
1 3
7
5
Publicité
