Domo DO421K Mode D'emploi page 34

DO421K
: for a mild coffee
: for a normal coffee
: for a strong coffee
Press button "2-4" if you wish to fine tune the strength of your coffee for 2 or 4 cups.
The display will show "2-4".
Note: the set coffee strength will be stored until you enter a new strength, or until the
appliance is disconnected from the mains longer than 1 minute.
Note: coffee strength also depends on the quality of the beans used.
ADJUSTING THE FINENESS OF THE GROUND COFFEE
Why? The fineness of the ground beans defines the taste of your coffee. The finer the
beans have been ground, the more bitter the coffee will taste.
Turn the coffee grinder to the left or to the right to adjust the fineness of the ground
coffee.
- to the left: a finer ground coffee
- to the right: coarser ground coffee
You can use the indicator on the coffee grinder to set the desired fineness.
MAKING COFFEE USING BEANS
CAUTION: Always take the coffee jug out of the appliance first. Otherwise, the jug
might fall out of the appliance when you open the filter.
Open the lid of the water reservoir and fill it up with the desired amount of water. Take
care not to fill the reservoir above the maximum level.
Close the lid of the water reservoir.
Remove the lid of the coffee grinder and fill up with coffee beans. Again, take care not
to fill the grinder above the maximum level.
Close the lid of the coffee grinder.
Open the filter retainer and install a 1 x 4 size filter in the filter retainer.
Close the filter retainer.
Make all desired adjustments on your coffee-maker.
Press the on/off switch to activate the coffee grinder – the indication light will light
up. The freshly ground coffee will end up in the filter and the coffee will be made
according to your settings.
Note: when the brewing process has been completed, the "cup" symbol on the display
will start to flash.
Press the on/off switch again to switch off the appliance - the indicationlight will
switch off. The appliance is now switched off.
34