Télécharger Imprimer la page

Domo DO421K Mode D'emploi page 33

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DO421K
Install the active carbon filter in the appliance as explained in the section "Installing
the active carbon filter".
Connect the appliance to the mains.
Fill the water reservoir with fresh water until the water indicator reaches "10".
Switch on the coffee-maker by pressing the "brew" button, and let the water run
through the machine without coffee. Dispose of the water.
Clean the jug with hot water.
Note: a little smoke may be generated when you first use the appliance.
USING THE APPLIANCE
Tips and clues:
CAUTION: your coffee-maker always uses the full amount of water that is present in
the appliance.
Whenever the appliance is working, you have to place the jug with lid on the heater
plate. If not, the drip stopper will engage and the coffee will not run.
The set time and coffee strength will be stored in memory until you set a new time
or coffee strength. Or until the plug has been pulled from the mains socket for longer
than one minute.
All settings will be restored to default whenever the appliance is disconnected from
the mains for longer than one minute.
The heater plate can keep your coffee warm for a certain time. It is yet advised to pour
the fresh coffee in a thermos and switch off the coffee-maker.
The drip stopper ensures the coffee doesn't run when the jug is not placed in the
appliance. Never take the jug out of the coffee-maker for more than 30 seconds during
the brewing process, otherwise the coffee filter will fill up and coffee will overflow.
SETTING THE TIME
Connect the appliance to the mains. The display text will start blinking. Use the "H"
button to set the hour, and the "M" button to set the minutes.
Note: Hour-count always starts with "0", minutes-count always starts with "00".
SETTING THE STANDARD COFFEE STRENGTH
Press the "2-10" button to set the desired amount of coffee to be ground. Possible
settings: 2, 4, 6, 8, or 10.
Note: the set amount of coffee to be ground is stored in memory until you set a new
amount, or until the appliance is disconnected from the mains longer than 1 minute.
FINE ADJUSTMENT OF THE COFFEE STRENGTH
Press button "
" to fine tune the desired coffee strength. The following
options can be selected:
33

Publicité

loading