Publicité
Les langues disponibles
Les langues disponibles
Fitting the plinth
Your appliance is delivered with a
transit brace, and a plinth is supplied.
1- Open the door.
2-
Remove the transit bracket from
GB
the door.
3- Unscrew the two screws to remo-
ve the transit brace.
4- Replace the two screws and was-
hers. Keep these parts carefully as
they may come in useful if you move
house with your appliance.
5- Use a bradawl or a nail to make
pilot holes for the plinth securing
screws.
6-
Fit the plinth end into the space
provided for the hinge bracket.
7- Screw the plinth on.
Reversing the door opening
Your appliance is delivered with the
door opening from left to right (hinges
on right). You can, if you wish, reverse
the door opening:
1- Unscrew the upper hinge, unhinge
and remove the door.
2- Remove the lower right hinge pin
and unscrew its support .
26
How to carry out your initial installation
2
3
3- Unscrew and remove the plinth, if it
is already mounted.
4
1
4- Screw the support to the left side of
the door and replace the hinge pin.
5
2
Publicité
