Drying And Styling Hair - SilverCrest SHTT 2200 B1 Mode D'emploi

Drying and styling hair

■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period. After drying the hair, switch to a lower blower and
heat level to shape the hairstyle.
With the supplied styling jet 1 you can apply a directed airflow to shape
■
and style your hair. Fit the styling jet 1 by pushing it with light pressure onto
the hairdryer so that it snaps into place and sits evenly on the hairdryer.
If you no longer require the styling jet 1, wait until the appliance has cooled
down and pull it off with a downwards snapping motion:
■ If you wish to dry your hair especially gently, or create a so-called "air-dried
wave", then use the finger diffuser 9. Start by removing the styling jet 1 with a
downwards snapping motion.
Fit the finger diffuser 9 by pushing it with light pressure onto the hairdryer so
that it snaps into place and sits evenly on the hairdryer.
If you no longer require the finger diffuser 9, wait until the appliance has
cooled down and pull it off with a downwards snapping motion:
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form.
You can use the cold air button 8
■
■ 20 │ GB │ IE
to cool your hair down.
SHTT 2200 B1