Technical Characteristics; Control Unit - Comeg SYMBIOZ Cam+ Manuel Utilisateur

11

Technical characteristics

Control unit

Main functions
• Class 1 device, CF-type applied part
• 3 programmable buttons
• Application and user MENUS
• Automatic compensation function for defective pixels
- RF transmitter:
• Type : RFID
• Frequency : 13,56 MHz
• Modulation feature : OOK
• Transmitter power : 70 mW (+18 dBm)
Video output
• CVBS: 1.0 V [P-P] / 75 ohms, Negative Sync
• Y/C: Y: 1.0 V [P-P] / 75 ohms, C: 0.286 V [P-P] (NTSC), C:0.3 V [P-P] V [P-P] (PAL) / 75 ohms,
Negative Sync
• RGB: 3 x 0.7 V [P-P] & 0.3 V [P-P] / 75 ohms
• HD-SDI, 3G-SDI: 0.8 V [P-P] / 75 ohms SMPTE292M, SMPTE425M-A
• DVI-D
Environment
• Operating temperature: +10°C / +40°C
• Operating humidity: 30 % to 75 %
• Transport and storage temperature: -10°C / +45°C
• Transport and storage humidity: 20 to 85 %
• Operating, storage and transport atmospheric pressure: 700 hPa to 1060 hPa
• Control unit is not drip-proof (IPXO)
• Not suitable for use in the presence of a flammable anaesthetic mixture with air, oxygen
or nitrous oxide
• Compliant with European directive 93/42/CEE
• Compliant with international standards IEC 60601-1; IEC 601-2-18; IEC 60417 and EN 980
• Dimensions (W x H x D): 310 x 136 x 385 mm
• Control unit weight: 4200 g
• Electric power supply: 100 - 240 VAC @ 50 Hz-60 Hz
• Electricity consumption: 50 VA
• Two T1AL - 250 V fuses (Marked UL/CSA only)
• Continuous operation
Camera head
• CF-type applied part
• Sensor: CMOS / Size : 1/2''
• Acquisition in native 16:9 format
• Progressive scan technology
• Resolution: HDTV 1080p format: 1920 x 1080 pixels
• Definition: 1080 lines
• Sensitivity: 0.1 lux
• Cable length: 3 m
• Sensor dimensions (D x H): 149 x 53 mm
• Sensor weight: 260 g
• Signal / Noise ratio : 57dB
29