switel DC65 Série Mode D'emploi page 58

Technical Properties
Connection is disturbed or cut off
The system no longer responds
No telephone calls possible
The batteries are empty within a
short time
The caller number display (CLIP
does not function
13 Technical Properties
Technical data
Feature
Standard
Power supply (base station)
Power supply (charging station)
Range
1
DECT: Digital Enhanced Cordless Telecommunication = Standard for cordless telephones.
2
GAP: Generic Access Profile = Standard for the interoperation of handsets and base sta-
tions from different manufacturers.
3
CLIP: Calling Line Identification Presentation = Displays the caller's phone number.
58
− The handset is too far from the base station.
− The base station is in an unsuitable location.
− Reset all the functions to their default settings;
. Page 55.
− Disconnect the power adapter plug briefly from the
power socket.
− The telephone is not connected properly or is de-
fective. Only use the telephone connection cable
supplied.
− Test whether the telephone connection is in order
by using another telephone.
− The power adaptor plug is not plugged in or there is
a complete power failure.
− The rechargeable batteries are empty or defective.
− The handset is too far from the base station.
− The wrong dialling mode is set; . Page 43.
− The batteries are empty or defective.
− Place the handset in the base station properly.
Clean the contact surfaces on the handset and
base station with a soft, dry cloth.
− Place the handset in the base station for 15 hours.
3
) − The caller number display (CLIP) is a supplemen-
tary service offered by your telephone network pro-
vider. Contact your network provider for further in-
formation.
− The caller has suppressed the transmission of their
phone number.
Value
DECT1−GAP
Inbox: 100−240 V AC, 50/60 Hz
Output: 6 V
Inbox: 100−240 V AC, 50/60 Hz
Output: 6 V
Outdoors: Approx. 300 m
Indoors: Approx. 50 m
2
, 200 mA
DC
, 200 mA
DC