Centring Of The Transporting Band; Fold Tables; Tray Supports - Merand AQUAPAN 75 Manuel D'instructions

23.1.2. CENTRING OF THE TRANSPORTING BAND

If the band had any tendency to move sideways over the screws, you'll have
to do the centring the following way:
Tense slowly the transportation band only on the side where it moves to until
you see that its starts to move to the opposite side.
At this moment loosen slightly at that same side, until you observe that it
keeps centred.
Repeat the process if its necessary. The process of centring the band is slow
and you need patience.

23.1.3. FOLD TABLES

The entrance and the exit table are folding; like that you win space while the
machine is not in use. To lift the table we will pull the knob A to let free the
secure piece and we will lift the extreme of the table until the security piece is
fixed in the superior part,

23.1.4. TRAY SUPPORTS

For helping the recollection of dough task, in the upper exit table there is a
mobile support to put the trays.
A
Page 49
H.BERDER 10/04/2012