23.
REGULATION AND MECANICAL ADJUSTMENTS
The machine is adjusted by fabric. But there can be some adjustments done
alter if there is a change on the conditions of use.
Following there are some details to see the different adjusts group by group.
23.1.
ENTRANCE–EXIT TABLE
23.1.1. TIGHTENING OF THE TRANSPORTING BAND
The transportation band of the entrance–exit table can be tightening or
loosened if the canvas slipped over the screws or there were slowing.
For that, we'll act on the tightening nuts "A" situated on both sides of the
machine. tightening or loosening the canvas always the same way on both
sides.
IMPORTANT: it's not convenient to leave the band to tight.
A
Page 48
H.BERDER 10/04/2012