Olympus FC-WR Mode D'emploi page 26

Firing the Flash at a High Shutter Speed
(FP TTL Mode / FP M Mode)
You can shoot with the fl ash at shutter speeds faster than the fl ash sync
speed. These modes are useful when you want to shoot a portrait with a blurry
background by widening the aperture, or when you want to use a high shutter
speed to reduce blown-out highlights in the background.
The guide number is lower than in the regular TTL mode or M mode.
1
Press the MODE button. Then, turn the dial to select TTL or M. Press
the OK button to confi rm.
2
Press HIF on the arrow pad to highlight FP.
Then, turn the dial to select "On."
3
Adjust the settings.
Setting the fl ash compensation (+/-) in the FP TTL mode
Press the a button to highlight +/- RATIO. Then, turn the dial to adjust the
setting.
• You can set a fl ash compensation from -5 to +5.
Press the OK button.
Setting the fl ash intensity (RATIO) in the FP M mode
Press the a button to highlight +/- RATIO. Then,
turn the dial to adjust the setting.
• You can set a fl ash ratio from 1/1 to 1/128.*
*1 You can select 1/2 EV or 1/3 EV for the adjustment
increment. (P. 28)
*2 On the scale display, t is the current selection. u is the
previous setting.
Press the OK button.
26
EN
MODE
FP
A
TTL
FP
B
TTL
FP
C
M
MODE
FP
A
TTL
FP
B
TTL
1
FP
C
M
Scale display*
RATIO FP CH
0.0
1
On
0.0
1/128
RATIO ZOOM LED
1/128
0.0
1/64
0.0
1/100
1/32
2