Technical Data; Rating Plate; Ambient Conditions - Mennekes AMAXX Notice D'utilisation Et De Montage

12. Technical Data

12.1 Rating plate

Example:
1
2
3
4
5
6
No.
1 Part number
2 Max. fuse protection for supply line, + I
3 Rated voltage
4 Frequency
5 Rated short-circuit current
6 Product standard
7 Weight of device
8 Manufacturing code
9 Rated diversity factor (RDF)
10 Protection class (IP)
Apart from the rating plate information also observe the
device-specific connected loads.
Ö
see appendix
22
7 8
Explanation
nA

12.2 Ambient conditions

For safe and trouble-free operation of the device, ensure
that the following ambient conditions are met.
Attention
10
Material damage due to unfavourable ambient con-
ditions
9
Consideration should be given to local ambient conditions
when setting up the device. Failure to do so may cause
damage to the device (e.g. decreasing load capacity of
the device).
• Give due consideration to ambient conditions when
setting up the device and to ensure safe operation of
the device.
• Do not enclose the device in an additional housing or
install it in the recess of a building before obtaining
approval from MENNEKES.
• Do not cover the lateral surfaces of the device.
• Avoid using explosive or easily flammable substances in
the vicinity of the device.
• Only use copper supply lines.
Permissible ambient temperatures for operation
Indoor and Outdoor Installation
Min.
- 25 °C
Max. Mean Value for 24-hour
Period
+ 40 °C not exceeding + 35 °C