Installing The Device - Mennekes AMAXX Notice D'utilisation Et De Montage

Opening the drain outlet (IP 44 only)
The housing has a drain outlet which can be opened (e.g.
formation of condensation)
Opening the drain outlet
• Use an appropriate tool to open the drain outlet (1) at the
underside of the housing, if necessary.
Fastening elements
Suitable screws and dowels must be used for wall installa-
tion.
To this end we recommend using the AMAXX fastening set,
which consists of:
– 4 screws, 6 x 70 Pozidrive, size 3, galvanised steel
– 4 universal dowels, 8 x 50 for concrete, porous concrete,
solid brick, perforated brick and plasterboard panels.
Fastening options:
Ö
see Product Catalogue or www.MENNEKES.de

5.2.2 Installing the device

Risk of sustaining injury due to electric shock
There is a risk of sustaining major injury or death when
working on or with live components.
• De-energise the supply line to the device prior to
• Secure the de-energised supply voltage connection point
• Check that the supply line is de-energised prior to
Drilling anchor points
1
Specifications on drilling dimensions for mounting the
device can be found in the "Technical data" chapter.
Ö
• Determine the drilling dimensions for the device and put
marks on the wall accordingly.
• Drill the anchor points and insert the dowels.
Risk of sustaining injury due to heavy device
If a heavy device is being transported, installed or
removed, it may fall down and cause injury.
• Transport and install a heavy device with the aid of a
• Use appropriate auxiliary equipment.
Danger
commencing installation tasks.
against inadvertent reactivation by other persons.
commencing installation tasks.
see page 23
Caution
second person if needed.
DE
EN
NL
FR
IT
11