2
1
Disconnecting the device
• Disconnect the wires from the electrical components.
• Loosen the cable gland (1).
• Pull the supply line (2) out of the housing (a).
• Push the mounting rails (3) back into the housing (b) so
that they lock in place.
Closing the device
• Close the device
Ö
see page 14
20
a
3
b
9.2 Dismantling the device
Caution
Risk of sustaining injury due to heavy device
If a heavy device is being transported, installed or
removed, it may fall down and cause injury.
• Transport and install a heavy device with the aid of a
second person if needed.
• Use appropriate auxiliary equipment.
Dismantling the device
• First loosen the lower screws (1) on the housing.
• Then remove the upper screws (2).
• Remove the device (3) from above.
• Remove the lower screws.
2
3
1