Cleaning With A Damp Cloth; Maintenance - Mennekes AMAXX Notice D'utilisation Et De Montage

7.2 Cleaning with a damp cloth

Should cleaning with a damp cloth be required due to
heavy soiling, then the device must only be cleaned in a
de-energised state.
Danger
Risk of sustaining injury due to electric shock
There is a risk of sustaining major injury or death in the
case of cleaning the device with a damp cloth and touch-
ing live components.
• Have an electrician de-energise the supply line of the
device prior to commencing cleaning tasks with a damp
cloth.
Attention
Material damage due to incorrect cleaning agents
The use of unsuitable cleaning agents, cleaning devices
and excessive use of water may cause damage to the
device.
• Obtain prior approval from MENNEKES for cleaning
agents you would like to use.
• Only clean the device and the components (e.g. sockets)
externally.
• Do not open the device and keep the sockets closed.
• Avoid the use of running water.
• Ensure that water cannot reach live parts.
• Do not use high-pressure cleaning appliances.
• Use clean water for cleaning tasks.
• Use a clean, damp cloth to clean the device.
18

8. Maintenance

The activities described in this chapter must only be
carried out by a qualified electrician.
The owner / user must have an electrician inspect the device
for proper condition at regular intervals.
Should damage to the device occur during its use, then this
should be rectified immediately.
Have an electrician take the device out of service if neces-
sary.
Danger
Risk of sustaining injury due to damaged device
There is a risk of sustaining major injury or death if the
device is damaged.
• Do not use the device if there is external damage.
• Mark the possibly damaged device, so that no other
person will continue to use it.
• Have a qualified electrician rectify the damage without
delay.
• Have an electrician take the device out of service if
necessary.
• Have an electrician inspect the device at regular intervals.