Target Groups; Qualified Electrician; Owner / User - Mennekes AMAXX Notice D'utilisation Et De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2.2 Target groups

2.2.1 Qualified electrician

The assembly, removal, installation, start-up and mainte-
nance of the device must only be carried out by a qualified
electrician.
The electrician must meet and observe the following
requirements:
– Comply with information given in the installation and
operating instructions in all aspects
– Ensure that the device is used as intended
– Knowledge and application of relevant electrotechnical
regulations (e. g. DIN VDE 0100, part 600;
DIN VDE 0100, part 410)
– Knowledge of general and special regulations pertaining
to safety and accident prevention.
– Ability to recognise risks and avoid possible hazards.
– Transfer of installation and operating instructions to the
owner / user of the device

2.2.2 Owner / User

Operation of the device may be carried out by persons with
or without electrotechnical training.
The owner / user must ensure that the device is used as
intended, and must also meet and observe the following
requirements:
– Comply with information given in the installation and
operating instructions in all aspects
– Ensure that the device is used as intended
– Instruct persons who use the device
– Recognise risks and avoid possible hazards
– Bring in an electrician in the case of errors or faults
– Protect persons (e.g. children) who are not able to accu-
rately assess the hazards associated with using the device.
– Permanent storage of installation and operating instruc-
tions for reference
DE
EN
NL
FR
IT
5

Publicité

Table des Matières
loading

Table des Matières