How To Check Overlapping Of Central Address No - Panasonic CZ-ANC2 Instructions D'installation

7. How to check overlapping of central address no.

(1) Press the and
seconds.
and CODE No. C1 will fl ash.
(2) Select CODE No. C3 by pressing
press the button.
C3 changes from fl ashing to ON state and
auto. overlap checking will start.
(3) If C3 changes from ON to fl ashing and
disappears, there is no overlapping.
Then fi nally, complete the auto overlap checking mode by pressing
the button.
(4) If some of GROUP No., ZONE No. and UNIT No. fl ash, you should
try again the zone registration.
①
Select CODE No. C1 by pressing
press the button.
②
Select the fl ashing GROUP No. with ZONE and GROUP button.
Then press the
UNIT No.
③
Then fi nally, complete the auto overlap checking mode by
pressing the button.
buttons at the same time for more than 4
, ( ) button and
stops fl ashing and
,
button and reselect the ZONE, GROUP and
will fl ash. Then
( ) button and
Fig. 12
EN
17