Installation Guide - Ramiaudio CARTRIDGE II Manuel Utilisateur

INSTALLATION GUIDE

It is good practice to plug in all the equipments before power on.
A/ Connections:
 The first time, connect Cartridge to your computer using RJ45 port (LAN on the rear panel).
Use a crossed wire.
Made in France
B/ Starting:
 Stand alone:
Cartridge II features a web server allowing to control from you favorite web browser. Open
your browser, enter the Cartridge address into the address window.
Default factory IP address is: 192.168.0.64.
http:// 192.168.0.64
You can now access the web pages, to configure the equipment, which network settings.
Attention, in case of difficulties, follows the procedure in "technical tools" annex.

Use on the net:
Connect Cartridge to the net using the RJ45 connector.
Attention: To work properly the Cartridge IP address should be unique on the network, and in
the available IP range. Should the PC or routeur net differ from Cartridge, first modify PC or
routeur to the same net as Cartridge, then set cartridge IP address as described in "technical
tools" annex.
RAMI
LAN
www.ramiaudio.com
IP FACTORY
RJ 45
RJ 45
DC 12V
RS 232
370 mA
-
+
16
Cartridge II