Set-Up Before Use; Clip-On Rake/ Brush Assembly - Hayward AquaVac 250 Manuel D'utilisation

Deformation, cracks, leaks
-
Smoke
-
4. When charging is complete, disconnect the external adaptor from the power source and
unplug the charging cable from the charging base.
IMPORTANT: Make sure to unplug the charging base from the swivel head after charging is
complete.
Normally the robot can operate up to 120 minutes on a full charge.
NOTE: Clean the debris compartment regularly. Excessive debris inside the compartment
increases the burden to motor operation and shortens the operating duration as a result.
NOTE: Rechargeable lithium-ion battery is classified as a consumable item. It has a limited life
and will gradually lose its capacity to hold a charge. Therefore, the running time of the robot will
gradually reduce after repeated charging and discharging throughout its product life.
Once the lifespan of the battery reaches its end, refer to section "BATTERY DISPOSAL" for
instructions regarding battery disposal and replacement of swivel head.
NOTE: Let the robot rest for around 30 to 40 minutes before charging it again.

Set-Up Before Use

Clip-on Rake/ Brush Assembly

TIPS: Press on the two hook ends to remove the rake/brush
IMPORTANT NOTE: Remove rake/brush after use. Otherwise, they may deform due to
constant compression, and could interrupt robot movement as a result.
9