Vermeiren V-drive Mode D'emploi page 9

rally be covered during the normal warranty
period unless such items require repair or re-
placement clearly as a direct result of a ma-
nufacturing or material defect. Such items
include (among others): upholstery and tyres.
7. The above warranty conditions apply to a
brand new V-Drives. Under normal circum-
stances, no responsibility will be accepted
where the V-Drive has required assistance as
a direct result of:
a. The V-Drive part not having been main-
tained in accordance with the manufacturers
recommendation.
b. Failure to use the manufacturer's specified
parts.
c. The V-Drive or part having been damaged
due to neglect accident or improper use.
d. The V-Drive or part having been altered
from the manufacturer's specification or re-
pairs having been attempted before the dealer
is notified.
In the event of your V-Drive requiring attention,
please contact your service agent/dealer and
give all relevant details so
quickly.
The manufacturer reserves the right to alter
without notice any weights, measurements or
other technical data shown in this manual. All
figures, measurements and capacities shown
in this manual are approximate and do not
constitute specifications.
COMP TIBILITY WITH WHEELCH IRS
The V-Drive is suitable for most folding wheel-
chairs:
- With a distance between tubing edges (W)
of 14½ " to 20" (37cm – 50cm). This is usu-
ally, but not always, the same as the wheel-
chair seat width
- A round tubing diameter (D) between 7/8" -
1" (22mm – 25mm)
Please note that you should check with your
dealer and/or the wheelchair manufacturer.
Vermeiren N.V. does not accept any respon-
sibility for other manufacturer's wheelchairs,
and in some circumstances a risk assessment
should be carried out prior to installation.
they can act
N.V. VERMEIREN
Vermeirenplein 1/15
2920 Kalmthout - Belgium
Tel: +32 (0)3 620 20 20
Fax:+32 (0)3 666 48 94
info@vermeiren.be
www.vermeiren.com
GB