Use - Beko BKS 1310 EY Manuel D'utilisation

4

Use

Check whether the mains voltage
given on the rating plate (on the
underside of the appliance) matches
the local mains voltage.
Preparation
Your appliance is supplied with a
dust bag already fitted. Once you
have assembled the individual parts
the appliance is ready to use.
1. Push the plug-in contact of the
C
elastic hose
vided on the dust container until it
latches into place.
Note
– To remove the elastic hose
press the side release buttons on
the plug-in contact and then pull
out the hose.
in the socket pro-
C
6
2. Firmly push together the two vacu-
um tubes with
slightly.
3. Insert the handle section of the va-
cuum hose in the upper end of the
vacuum tube and insert the floor
brush in the lower end.
4. Fit together all the plug-in connec-
tions with a push and turn move-
ment and undo them with a pull
and turn movement.
,
EN
A B
and , turning