Beko BKS 1310 EY Manuel D'utilisation page 9

Switching on and off
1. Pull out the required length of po-
wer cord by pressing pushbutton
E
.
Caution
– A yellow mark appears at the end
of the cable. The maximum cable
length is indicated by a red mark.
Never try to pull out the power cord
beyond the red mark.
E
2. Plug the power cord plug into the
wall socket.
3. Switch on the appliance by pres-
sing pushbutton
gelb
rot
G
.
G
7
4. Set the required suction power
E
with switch .
5. After use, press pushbutton
switch off the appliance and remo-
ve the power cord plug from the
wall socket.
Caution
– If the appliance is not being used,
always disconnect the mains plug
at the wall socket.
Rewind power cord
1. Unplug the power cord plug from
the wall socket.
2. Hold the power cord in one hand
and press pushbutton
pressed.
3. Carefully guide the power cord
back into the appliance.
E
Caution
– Always rewind the power cord
with care as pressing one side of
pushbutton and a high rewinding
speed can cauise unforeseeable
cable movements.
EN
F
G
to
E
, keep it