Attaching The Seat Pad - Precor Discovery Plate Loaded Serie Manuel De L'utilisateur

Attaching the Seat Pad

The seat mechanism is preassembled, except for the seat pad and the gas
spring.
To attach the seat pad:
1. Position the pad over the seat bracket so that the screw holes in the seat
and the bracket line up.
Figure 10: Seat position
Pulldown Assembly Guide: Assembling the Equipment
2. Insert four ⁵₁₆-inch x 1¹₂-inch hex head screws with 9mm flat washers into
the screw holes in the pad, as shown in the following figure.
Figure 11: Seat attachment
3. Position the pad if necessary, then tighten the fasteners completely.
13