Proper Use; Safety Instructions - VOLTCRAFT 51 18 01 Notice D'emploi

Proper use

The power adapter is intended for operation with information technology devices
such as digital cameras. The wide-range input enables operation on a power
supply from 100 to 240 V~ 50/60 Hz. A stabilised direct output voltage can be
selected in 6 steps from 6V to 24VDC (6 or 9 or 12 or 15 or 18 or 24VDC) for the
models SNG24-24W-A & SNG24-48W-A and 3V to 12VDC(3 or 4.5 or 6or 7.5 or
9 or 12VDC) for the models SNG12-12W-A & SNG12-24W-A. The maximum
current consumption of models SNG12-12W-A & SNG24-24W-A are 1000mA
and models SNG12-24W-A & SNG24-48W-A are 2000mA. Eight different
adapters are included with the power adapter suitable for the most common low
voltage power loads used in information technology such as digital cameras. A
polarity selection is possible by reversing the polarity of the low voltage plug. The
power consumption of the load should not exceed the power rating of the adapter
(according to voltage setting). Overloading of power adapter will occur if
exceeded the power rating and the power adapter may be destroyed in the event
of this (short-circuiting or excessive current consumption). The power adapter
technology allows a high output with small size and low weight. Operations under
adverse conditions are not permitted. Adverse conditions are as follows:
Moisture or excessive humidity
Dust or flammable gases, vapours or solvents
Use other than the one described above leads to damages of the product and
also is associated with dangers like short circuit, fire, electric shock, etc.
The safety instructions must be strictly observed!
Safety instructions and Hazard Warnings
Damage, due to non-compliance with these operating instructions, leads to
expiry of the warranty. We do not accept liability for damage to property or
injury to persons caused by mishandling or non-compliance with the safety
instructions.
An exclamation point in a triangle indicates important information in the
operating instructions. Please read the instructions completely as they
contain information for the correct operation of the device.
11