9.6 Cleaning the inside of the fire box
Daily or before each ignition, it is necessary to
check that the burn pot is clean to ensure the
free flow of combustion air from the holes of the
burn pot itself.
Vacuum the ash accumulated in the burn pot
(Fig. 35).
ATTENTION: remove the ash from the
combustion chamber because the salts
present cause corrosion of the metal. In
addition, the ash could block the pas-
sage of air, varying the development of
the flame which, if it approaches the
glass, would increase corrosion.
After cleaning the burn pot, remove it from its
housing and clean the space where it is con-
tained (Fig. 35).
If necessary, remove the ash drawer and empty
it, making sure to remove any residue in the
compartment where it is contained (Fig. 36).
Using an ash vacuum can simplify the
cleaning operations
70
òòlòòòòPulPip
ff lllllll
9.7 Cleaning the fan grille
It is recommended to carry out cleaning with the
stove switched off and cold.
Vacuum the fan grille located at the base of the
stove (Fig. 37).
Fig. 35
Fig. 36
Fig. 37
004776771 - 29/10/2021