Clatronic MS 369 Mode D'emploi page 32

Overview of the Components / Delivery Scope
1 Lid
2 Seal ring of lid
3 Stirring tool
4 Seal ring of tool holder
5 Handle
6 Multifunction button
7 Power cable
8 Base
9 Jug
10 Tool holder
11 Froth beater
Unpacking the Appliance
1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic film, filler
material, cable ties and box packaging.
3. Check that all the parts are in the box.
4. Do not operate the appliance if package contents is
incomplete or appear damaged. Return it immediately to
the dealer.
NOTE:
There may still be dust or production residues on the
appliance. We recommend that you clean the appliance as
described under "Cleaning".
Notes on Use
Location
A skid-proof, even surface is suitable as installation location.
Electrical Connection
1. Ensure that your mains power corresponds with the spec-
ifications of the appliance. The specifications are printed
on the type label.
2. Connect the mains cable to correctly installed and earthed
socket.
Multifunction button
Press 1 x = Hot (glowing red)
Press 2 x = Warm (flashing red)
Press 3 x = Cold (glowing blue)
Press 4 x = Off
Jug
Should you remove the jug from the base during operation
and replace it on the base within approx. 1 second, the previ-
ously selected function will continue.
Seals
The tool holder and the lid are equipped with a seal. Be sure
that the seal rings are always properly secured in place.
32
MS3693_IM
Capacity
The jug holds between 120 and 300 ml. Refer to the scale
on the jug:
MAX 120 ml (maximum quantity for frothing)
MAX 300 ml (maximum quantity for stirring)
Frothing Milk
CAUTION:
Observe the capacity marking MAX , otherwise the milk
will foam over.
NOTE:
• For optimum results use milk with 3.5 % fat content and
fill in 200 ml.
• Milk with 1.5 % fat content and soy milk or lactose-free
milk does not froth as well.
Heating up Drinking Chocolate / Hot Chocolate
CAUTION:
• Please add cocoa or chocolate only after you have filled
in the milk.
• Cut the chocolate into little pieces and do not fill in too
much chocolate.
• Do not fill above the MAX
beverage will overflow.
• If you want to make hot chocolate, take off the froth
beater.
Usage Table
For information about how to use the milk frother please refer
to this table:
Usage - desired result
attachment
Hot frothed milk Froth beater
Hot stirred milk Stirring tool
Steamed milk Froth beater
Warm stirred milk Stirring tool
Cold foamed milk Froth beater
Cold stirred milk Stirring tool
Hot Chocolate Stirring tool
Operation
1. Place the desired attachment on the tool holder. Place the
tool holder with the attachment centrically in the jug.
2. Fill the liquid into the jug.
3. Put on the lid.
4. Place the jug on the base.
5. Depending on the desired application, press the button
once, twice or three times .
mark, otherwise the
Mixing Multifunction
button
Press 1 x
Press 1 x
Press 2 x
Press 2 x
Press 3 x
Press 3 x
Press 1 x
26.10.17