JVC 3-CCD KY-F550 Mode D'emploi page 45

"FILE MANAGE" Screen (continued)
1. 2.
- - - F I LE MANAGE - - -
LOAD F I LE A
LOAD CANCE L
STORE F I LE A
STOR E CANCE L
RESET F I LE A
RESE T CANCE L
PAGE BACK
3. 4.
- - - F I LE MANAGE - - -
LOAD F I LE A
LOAD EXECUTE
STORE F I LE A
STOR E
CANCE L
RESET F I LE A
CANCE L
RESE T
PAGE BACK
1. 2.
- - - F I LE MANAGE - - -
LOAD F I LE A
LOAD CANCE L
STORE F I LE A
CANCE L
STOR E
RESET F I LE A
CANCE L
RESE T
PAGE BACK
3. 4.
- - - - - -
F I LE MANAGE
LOAD F I LE A
LOAD CANCE L
STORE F I LE A
STOR E CANCE L
RESET F I LE A
EXECUTE
RESE T
PAGE BACK
Retrieve file
1.
Blinking
Use the [5/∞] buttons to select "LOAD FILE", then press the
[SET] button.
The set value displayed will start to blink.
2.
Use the [5/∞] buttons to select "A", "B" and "C", then press
the [SET] button.
3.
Use the [5/∞] buttons to select "LOAD", then press the [SET]
button.
"CANCEL" will start to blink.
4.
Use the [5/∞] buttons to select "EXECUTE", followed by
Blinking
pressing the [SET] button to retrieve the menu settings from
the selected file destination.
Reset the set value
1.
Use the [5/∞] buttons to select "RESET FILE", then press
the [SET] button.
The set value displayed will start to blink.
2.
Use the [5/∞] buttons to select a file to reset, then press the
Blinking
[SET] button.
"A", "B", "C", "CURRENT" (Current Set Value)
3.
Use the [5/∞] buttons to select "RESET", then press the [SET]
button.
"CANCEL" will start to blink.
4.
Use the [5/∞] buttons to select "EXECUTE" and press the
[SET] button to reset the set value.
Note
Blinking
Resetting the stored files ("A", "B" and "C") will not reset the current
set value.
To reset the current set value, select "CURRENT".
E-45