2. Preparation Before Shooting (continued)
Precautions to Prevent Camera From Falling
● Special attention is required when mounting to the wall or ceiling. Get a contractor
to perform the work and avoid doing it on your own. Unit may fall off and cause
injuries or accidents.
● Mount the unit to a secure place using safety cable to prevent it from falling. To
mount, make use of the bracket fastening screw holes on the face without the cam-
era mounting bracket. (M2.6 x 4 mm) Pay attention also to the length of the cable.
● Strength of cable to prevent falling of unit shall be at least 10 times greater than the
total mass of the camera and lens.
E-20
Safety cable to Prevent
Falling of Equipment
4 mm
1-1.5 mm
Camera Head
Caution