Use; Qualification Of Operating Personnel; Operating Controls - Kemper MaxiFil Notice D'utilisation

EN

6 Use

Every person who deals with use, maintenance and repair of the product must have
thoroughly read these operating instructions, as well as the instructions for any
attachment and accessory products, and have understood them.

6.1 Qualification of operating personnel

The operating company of the product may only commission persons to use the
product independantly if they are well-versed in this task.
Those familiar with this task includes those who have been instructed appropriately in
the task and know the operating instructions as well as the operational issues in
question.
Only allow instructed or trained staff to use the product. This is the only way to
ensure safety and hazard awareness of all personnel during work.

6.2 Operating controls

Controls and connection facilities are located on the front side of the product:
Fig. 11: Operating controls
1502762-00 - 56 -