HQ Power HQSA1010 Mode D'emploi page 4


In the event of an operating problem, stop using the device immediately.

Never try to repair the device. There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.

This device is not designed for permanent operation: regular operation breaks will
prolong its live.
3. General Guidelines

Refer to the Velleman
manual.

All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.

Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
5
6
5. Operation
5.1 Charging
This device contains an internal rechargeable battery. When the device reaches end-of-
life, it must be disposed of in accordance with local regulations.
1. Switch off the device.
2. Connect the device to a powered USB output using the included USB cable. The
charge indicator burns red.
3. The charge indicator turns off as soon as the device is fully charged. Disconnect
from the power source. The device is now ready to be used.
V. 01 – 17/05/2018
®
Service and Quality Warranty on the last pages of this
microphone
charge input
USB connection
card slot
charge/power LED
aux input
HQSA1010
7
8
9
10
11
4
previous/decrease volume
on-off
play/pause
next/increase volume
LED control
©Velleman nv