Specifications; Optional Attachments/Accessories - DeWalt DW708 Guide D'utilisation

FIG.3
DUST SPOUT
BLADE WRENCH
BEVEL STOP
OVERRIDE
BEVEL STOP SCREWS
BEVEL
ADJUSTMENT/LOCK
HANDLE
BASE STABILIZER
(NOT SHOWN)
BASE
FIG. 4
TRIGGER SWITCH
SPINDLE LOCK BUTTON
KERF PLATE
BENCH MOUNTING HOLES
MOTOR END CAP
RAILS
LIFTING
HANDLE
BELT COVER SCREW
OPERATING HANDLE
BLADE GUARD
ARBOR COVER
LOCK DOWN PIN
FENCE
MITER ADJUSTMENT/LOCK
HANDLE
DETENT
TRIGGER
TABLE
MITER SCALE
BELT COVER
RAIL LOCK KNOB
THUMBSCREW
GROOVING STOP
FENCE ADJUSTMENT
KNOB (NOT SHOWN)
HAND HOLDS
5

Specifications

CAPACITY OF CUT
50° miter left, 60° miter right
48˚ bevel left and right
US Models
Miter Bevel Max Max
Height Width
____ _____ ______ _____
0° 0° 4.7" 12"
45 L&R° 0° 4.7" 8.5"
0° 45° L 3.2" 12"
0° 45° R 1.7" 12"
DRIVE
120 Volt Motor
2200 Watts
15 Amp Motor
4000 RPM
Cut Helical Gears with Roller Bearings
Multi-V Belt
60 Tooth Carbide Blade
Automatic Electric Brake

Optional Attachments/Accessories

Recommended accessories fo use with your tool are
available at extra cost from you local service center. If you
need any assistance regarding blades or accessories, please
contact D WALT Industrial tool co., 701 East Joppa Road,
E
Baltimore, MD 21286 or call 1-800-4-D
9258).
WARNING: For safe operation, read instruction literature
included with attachments/accessories.
MITER SAW WORKSTATION: DW723
The workstation allows you to adjust the position of your miter
saw quickly and easily. It comes with a workpiece support and
a length stop.
EXTENSION KIT: DW7080
Used to support long overhanging workpieces, the work
support is user assembled. Your saw table is designed to
accept two work supports; one on each side. One set stores
conveniently under the saw table.
ADJUSTABLE LENGTH STOP: DW7051
Requires the use of one work support detailed above). It is
used to make repetitive cuts of the same length from 0 to 42"
(0 to 106 cm).
MATERIAL CLAMP: DW7082
This accessory is used for firmly clamping workpiece to the
saw table for precision cutting.
CROWN STOP: DW7084
This accessory is used for precision cutting of crown molding.
DUST BAG: DW7053 (SOME MODELS)
The dust bag is equipped with a zipper for easy emptying.
Non-US Models
Max Max
Height Width
______ _____
4.5" 12"
4.5" 8.5"
2.9" 12"
1.7"` 12"
WALT (1-800-433-
E