Triangle SENSA Mode D'emploi page 27

Connection via an RCA cable
An RCA cable (included) enables you to connect your SENSA speakers to your television, CD player
or other devices. To do so :
Î Plug the red and white connectors into "RCA INPUT" on the back of the SENSA speaker,
following the colours and do the same on the source.
Î Select the "RCA" input using the remote or the "INPUT" button on the back of the active
speaker. The green LED indicates that the source is connected to the "RCA" input. Your system
is ready to operate.
Connection via an RCA cable for turntables
An RCA cable (not included) enables you to connect your SENSA speakers to your turntable. To
do so :
Î Plug the red and white connectors into "RCA INPUT" on the back of the SENSA speaker,
following the colours and do the same on the source.
Î Attach the ground cable connector to the designated terminal on the amplifier.
Î Select the "RCA" input using the remote or the "INPUT" button on the back of the active
speaker. The green LED indicates that the source is connected to the "RCA" input. Your system
is ready to operate.
25
EN