Î Connecting Sources - Triangle SENSA Mode D'emploi

EN
CONNECTING SOURCES
The SENSA speakers can be paired with a variety of sources. Here are the various options :
Connection via Bluetooth
SENSA lets you play music from any Bluetooth-enabled sources: smartphone, tablet, computer...
To do so :
Î Slide the power switch on the back to the ON position to activate your SENSA speakers.
Î Select the "Bluetooth" input using the remote or the "INPUT" button on the back of the speaker.
The blue LED indicates that the source is connected via "Bluetooth".
Î When selecting the source, the LED is blinking blue indicating that the system is seeking to
connect to a Bluetooth-enabled device (smartphone, tablet...).
Î When you search on your Bluetooth device (refer to the owner's guide if needed), the SENSA
speakers should appear under the name "SENSA SN01A" or "SENSA SN03A", you can then
connect to them. Your speakers are now linked to your device and will reproduce the sound from
the device. The connection will be done automatically next time you switch on your speakers if
Bluetooth is selected and enabled on your device.
Î If you wish to connect another device while the previous one is still connected, press and hold
the "PAIRING" button on back of the speaker for 2 seconds. The previously paired-device will
automatically be disconnected and the seeking mode (blinks of the blue LED) of the speaker
activated. Repeat the previous step to connect your new device.
Î SENSA's Bluetooth interaction allows you to change track, play and pause directly from your
remote, without using the connected device.
Î Your Bluetooth device now controls your speakers and you can change the volume directly from
this device.
24