Publicité
Les langues disponibles
Les langues disponibles
[ EN ]
ASSEMBLY
INSTRUCTIONS
Step 4.
•
Attach the Backrest (#8) to the Backrest Pipes (#4) using 4 x Hexagon
Bolts M8x55mm (#17) & 4 x Ø8 Flat Washers (#19). Securely tighten.
•
Attach the Seat (#7) to the Main Frame (#1) using 4 x Hexagon Bolts
M8x18mm (#18) & 4 x Ø8 Flat Washers (#19). Securely tighten.
7
19
18
8
4
19
19
17
17
19
19
1
17
17
19
18
ASSEMBLY
INSTRUCTIONS
Step 5.
•
Insert the Long Handlebar Pipe (#10) into the hole on the Front Support
Bracket (#2) & attach in the centre with 1 x Hexagon Bolt M8x25mm
(#34). Securely tighten.
•
Attach 2 x Handlebar Covers (#11) to the Long Handlebar Pipe (#10).
•
Attach 2 x Foam Covers (#12) over the Handlebar Covers (#11) & the
Long Handlebar Pipe (#10). Push firmly to the centre of the join between
the Long Handlebar Pipe (#10) & Front Support Bracket (#2).
•
Attach 2 x Foam Covers (#12) to the Leg Bar (#9) & insert 2 x Leg Bar Caps
(#32).
11
12
32
12
2
9
12
32
[ EN ]
10
12
11
Publicité
