Technical Data - hawa 3353 Notice De Montage Et D'utilisation

Slide on latch shoe

8. Technical Data

Static loads:
Maximum load, incl. weight of enclosure:
Maximum load on mounting plate:
Maximum load on doors:
Notes:
All specifications apply:
a) provided the load is evenly distributed on the surface or in the space,
b) for attachment according to the specified position when in use – see Instructions for Installation.
IK rating: IK08 (if used in compliance with its intended use).
IP rating: single door: IP66/69
Torque specifications:
The specifications stated below have been uniquely determined for standard stainless-steel enclosures and are deemed to be binding under
optimum conditions.
• Mounting plate even and folded
Attachment / locking of mounting plate:
Stainless steel: 10 Nm
• Lock (after exchange and repair)
Attachment of lock casing to door panel (M22 x 1.5, SW 27)
Stainless steel: 25 Nm
Attachment of latch to lock casing (screw M6, SW 10): 10 Nm
• Hinges (after exchange due to repair)
Attachment to mounting bracket on body: (nut M5, SW8): 2 Nm
Attachment to mounting bracket on door:
a) bolt M4 (nut M4, SW7): 1 Nm
b) bolt M5 (nut M5, SW8): 2 Nm
Attachment of depth adjustment (screw, nut M5, SW8): 2 Nm
16
Push locking wedge in and click into place
Check:
Seen from outside, the locking pin is always in a vertical position when locked.
up to W x H in mm: 620 x 820:
820 x 1020:
more:
unfolded
folded
2 hinges
3 hinges
1.700 N
2.500 N
3.000 N
2.000 N
3.000 N
250 N
500 N