hawa 3353 Notice De Montage Et D'utilisation page 15

- mounting position of the lock to the door edge!
Mounting position of the turn limiter of the locking latch for right-hinged or left-hinged doors, respectively:
Right-hinged:
Left-hinged:
Use a torque wrench to tighten the turn lock casing nut M22 x 1.5 and the hex socket screw for latch fastening – for torque specifications, see
"8. Technical Data".
Attention: The grounding claws of the nut M22 x 1.5 must be visible – otherwise please remove the nut and turn!
Mount latch shoe and locking wedge.
15