Singer S900 Manuel D'instruction page 96

PIPING FOOT
Use this foot to insert piping into seams or edges of projects.
It can also be used to create piping by covering cord. The foot
has two grooves on the underside: use the left groove to insert
right.
TO STITCH PIPING INTO A SEAM
making sure that the needle clears the hole on the foot.
side of the fabric. Place the second piece of fabric on top of
4. Place the fabric and piping under the piping foot, aligning
the piping with the groove on the underside of the foot.
guide the piping.
TO CREATE PIPING
1. Cut bias fabric strips wide enough to cover the cord, making
sure to include seam allowances in the measurement.
making sure that the needle clears the hole on the foot.
3. Place the cording on the wrong side of the fabric strip, then
wrap the fabric over the cord so the raw edges are even.
4. Place the fabric and cord under the piping foot, with the
cord in the groove on the underside of the foot.
ROLLER FOOT
fabrics such as leather, suede, vinyl and heavy knit fabrics.
2. Manually lead the thread from the needle through the
opening of the foot, then slip the thread under and behind
the foot.
together for sewing, which will prevent either layer from
slipping.
4. Place fabric under the presser foot. Lower the presser foot.
94