Product Description; First Steps - TESTO 606-2 Mode D'emploi

14

Product description

Product description
At a glance

First steps

 Inserting batteries:
1 To open the battery compartment, push the battery cover
down.
2 Insert batteries (2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
 Basic settings (configuration mode):
Adjustable functions
· Unit of temperature: °C, °F
· Unit of humidity: %, td (dew point), WB (wet bulb)
· Auto off function: OFF, ON (instrument switches off automatically if no key is
pressed for 10 minutes)
1 When switching the instrument on, press and hold
and
- The adjustable function is displayed. The current setting
flashes.
appear on the display (configuration mode).

Protection cap: Park position

Sensing electrodes
Caution! Risk of injury
from sensing electrodes!
Attach protection cap
>
when not in use.

Humidity/temperature sensor

Display

Control keys

Battery compartment (on rear)

Test resistance contact

List of settable materials, for
sticking into the protective cap
until