Installation Of The Outdoor Unit; Clearances; Installation; Attachment To The Ground - Airwell X 1100 Manuel D'installation Et De Maintenance

INSTALLATION OF THE OUTDOOR UNIT

Place the AIR COOLED condenser outdoors in a location not accessible
to the public and without air pollution (smoke, acid, etc...).

CLEARANCES.

Respect the minimum dimension indicated for correct operation and to
avoid air recycling, even partially between air intake and air discharge.

INSTALLATION.

Install and attach the AIR COOLED condenser on a masonry surface
(concrete slab).

ATTACHMENT TO THE GROUND

4 oblong holes 9 x 16 mm

REFRIGERANT CONNECTIONS (AIR COOLED UNIT)

The refrigerant line couplings valves are situated behing the lower front
panel of the unit, at the rear.
Valve A: GAS line
pipe Ø 1/2"
Valve B: LIQUID line
pipe Ø 3/8"
outdoor unit
Valve GAS line
Cable passage
Valve LIQUID line
X
83 570
A
B
The outdoor unit are factory charged and equipped with refrigerant
connections. Follow the connection instructions for the valves with non-
removable membranes.
11
172
electrical section
Access panel
indoor unit
A
B