Description; Installation; Installation Of The Indoor Unit; Clearance - Airwell X 1100 Manuel D'installation Et De Maintenance

DESCRIPTION

1. Control cable - case of three-phase 400V. power supply without neutral.
2. Cable for remote control (accessory).
3. Interconnections to UC.
4. Power cable.
5. condensate drain hose Ø0200x025.
6. Refrigerant lines to UC or cooling water inlet and
outlet with hoses (length 1m - connection on female
union nut Ø 20x27 - case water cooling).
7. Connection duct fresh air intake (side or rear).
8. Connection of the built-in hot water coil (male
water inlet and outlet Ø 26x34).
9. Safety drain at unit bottom (closed with a plug) -
pipe Ø 22mm.
10. Access panel to connections (refrigerant, power
supply).
11. Removable front air intake panel.
12. Controls and regulation.
13. Air discharge openings.

INSTALLATION

The unit is not designed to withstand weights or stresses from adjacent equipment, pipe work or
constructions. Any foreign weight or stress on the unit structure could lead to a malfunction or a
collapse with dangerous consequences for personnel and property. In such an event, the warranty
shall be null and void.

INSTALLATION OF THE INDOOR UNIT

CLEARANCE

1. on the connection side
2. for total rear air intake
3. for front air discharge with plenum accessory
4. for direct vertical air discharge
RESPECT MINIMUM CLEARANCES SPECIFIED AROUND THE UNIT.
650mm
650mm
8
900mm
650mm
1200mm