Audio Menu 2 Functions; Subwoofer Output (Sub W-1) - Pioneer PRIEMIER SUPER TUNER III DEH-P920R Mode D'emploi

Audio Adjustment
3. Operate a mode.
4. Cancel the Audio Menu 2.

Audio Menu 2 Functions

The Audio Menu 2 features the following functions.

Subwoofer Output (Sub W-1)

When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is OFF.
The Subwoofer output phase can be switched between normal, or 0˚ ("Phase:NOR"), and
reverse, or 180˚("Phase:REV"). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is "Sub woofer control External", you cannot switch the
Subwoofer ON/OFF mode. In this case, this setting is not necessary. (Refer to page 62.)
• Select the OFF setting when you do not want the Subwoofer to operate.
1. Select the Subwoofer ON/OFF mode (Sub W-1) in the Audio Menu 2.
(Refer to page 48.)
2. Switch the Subwoofer output
ON/OFF with the 5/∞ buttons.
3. Change the phase of Subwoofer
output with the 2/3 buttons.
49