Door Lock Confirmation; Operation Of "Dfs Alarm; Arming Alarm - Pioneer PRIEMIER SUPER TUNER III DEH-P920R Mode D'emploi

Door Lock Confirmation

The door lock confirmation feature was incorporated to ensure that the correct door lock
type has been selected. (e.g. Set to "Lock System: Negative, Current mode: Close".)
1. As the vehicle's doors are
unlocked with central door lock
system the display should flash
"Lock System: Negative,
Current mode: Open" accord-
ingly.
If not, select the alternative door
lock type by pressing the 2 or 3
button.
2. Press the BAND button and
cancel the DFS Alarm Setting
Menu.
Setting of the "DFS Alarm" is now
complete.
Note:
• In case that the battery is disconnected or the RESET button is pressed, it may be necessary to
reprogram the DFS Alarm Menu, otherwise this setting needs to be done only once.
• When the DFS Alarm is armed, you cannot disarm it by pressing the RESET button.

Operation of "DFS Alarm"

Providing the installation and setting of the "DFS Alarm Setting Menu" has been per-
formed correctly, operation of the "DFS Alarm" is very simple.

Arming Alarm

To arm your Alarm simply turn off the ignition and detach the front panel, as described on
page 57. After detaching the front panel the "DFS Alarm" will automatically arm itself
after 30 seconds, providing all of the doors are closed. If after 30 seconds, a door still
remains open the DFS Alarm will not arm until the last door has been closed. After closing
all of the doors, ensure that they are securely locked. The LED indicator on the head unit
will flash as a visual deterrent. Your vehicle is now protected by your "DFS Alarm".
70