Selecting The Digital Attenuator; Selecting The Wall Paper (Wall Paper); Selecting The Brightness (Brightness) - Pioneer PRIEMIER SUPER TUNER III DEH-P920R Mode D'emploi

Initial Setting
Selecting the Digital Attenuator (Digital Attenuator)
When listening to a CD or other source on which the recording level is high, setting the
equalizer curve level to "High" may result in distortion.
You can switch the digital attenuator to "Low" to reduce distortion. (Sound quality when
the setting is "High" is better than when the setting is "Low", so usually set to "High".)
1. Press the FUNCTION button and select the Digital Attenuator mode
(Digital Attenuator) in the Initial Setting Menu.
2. Select the desired attenuation
level with the 2/3 buttons.
Low Ô High

Selecting the Wall Paper (Wall Paper)

This product is equipped with three types of wall paper.
1. Press the FUNCTION button and select the Wall Paper mode
(Wall Paper) in the Initial Setting Menu.
2. Select the desired Wall Paper
with the 2/3 buttons.

Selecting the Brightness (Brightness)

You can select the display brightness. The display shows "0" – "31".
1. Press the FUNCTION button and select the Brightness mode
(Brightness) in the Initial Setting Menu.
2. Select the desired Brightness
with the 2/3 buttons.
64 63