Download Data; Backlight; Keypad Lock - Oregon Scientific Outbreaker Mountain-Ski Mode D'emploi

DOWNLOAD DATA

Follow these procedures to download data:
1. After installing the CD-ROM click the "Oregon
Scientific" icon on your PC.
2. In the main menu, select "Communication".
3. Connect the USB connector cable.
4. Press MODE until you reach PC Mode.
5. Clip the cable onto the watch. Make sure that pins
are matched and secured.
6. Select "Connect" in the "Communication" sub-menu
of the PC software.
7. You will see an arrow mark on the watch, and
"download in progress" on your PC.
8. Select "Read Trip Data" in the "Communication" sub-
menu, then follow the on screen instructions.
9. Select "Format" to process the data arrangement.
10. Download is now complete. Select desired graphical
report.
NOTE See the PC Kit (AD103) User Manual for further
information.

BACKLIGHT

To turn the backlight ON for 5 seconds:
1. Press .
2. Press any other key while the light is on and it will
extend the light time by another 5 seconds.
NOTE The backlight does not work when the low battery
is shown and will return to normal once the batteries
are replaced.

KEYPAD LOCK

To turn the keypad lock ON or OFF:
• Press and hold
ON and OFF. When it is set to ON the
appear on the display.
22
for 2 seconds to toggle between
icon will