Set The Auto-Reload; Ski Timer Sound Alert - Oregon Scientific Outbreaker Mountain-Ski Mode D'emploi

3. Use + or - to turn the auto-stop ON.
4. Press and hold SET to enter base level setting option.
5. Use + or - to change the setting and press SET to confirm.
To quickly change the auto-stop base level when the
auto-stop function is ON:
1. Reload the ski timer.
2. Press and hold SELECT to automatically make your
current altitude level become your base level reading.
3. To fine-tune the base level, press + or -. Press SET
to confirm.

SET THE AUTO-RELOAD

To set auto-reload:
1. Press MODE to navigate to Ski Timer Mode.
2. Press and hold SET. Then press SET until you reach
the screen below.
3. Use + or - to turn the auto-reload ON.
4. Press and hold SET to enter the reload altitude offset
setting option. Use + or - to change the setting and
press SET to confirm.

SKI TIMER SOUND ALERT

The countdown timer advises you of the countdown status
with a series of beeps.
COUNTDOWN TIME
Last 5 secs
0 sec
15
SOUND ALERT
1 short beep each sec
1 long beep